| 立式双吸泵结构特点 |
| 添加时间：2020/8/27 15:15:41 浏览次数： |
| 一 、独特的便拆式结构使其具备以下几种便拆功能： 1、 The unique removable structure makes it have the following functions: 1SLB型泵于电机的部分便拆功能，便拆式泵所采用的电机通用程度高。如果需要更换同样型号的电机或水泵时，只需拆开并取出对夹式联轴器，然后拆开电机与支架的链接螺丝就可取下电机货水泵进行更换。 The 1slb pump has a part of the motor detachable function, and the motor used in the removable pump has a high degree of generality. If it is necessary to replace the same type of motor or water pump, just disassemble and take out the clamp type coupling, and then remove the connecting screw between the motor and the bracket, then the motor cargo water pump can be removed for replacement. 2SLB型泵的更换机械密封件部分便拆功能：便拆式泵在更换机械密封件时，不需拆电机，只需拆开并取出对夹式连轴器，然后打开密封件压盖，便可取出机械密封件进行更换。 The mechanical seal part of 2slb pump can be disassembled easily: when replacing the mechanical seal, it is not necessary to dismantle the motor, but only to disassemble and take out the clamp coupling, and then open the seal gland to take out the mechanical seal for replacement. 二、 结构紧凑、外型美观：该系列泵为便拆式结构，机泵一体，外型美观，其立式结构决定安装占地面积小，不仅缩小泵房面积，改善了面积，改善了空间，而且大大节省基建投资。如采用IP54户外电机，更能节省泵房基建的投入。 2、 Compact structure and beautiful appearance: the series of pumps are easy to dismantle structure, the machine and pump are integrated, and the appearance is beautiful. Its vertical structure decides that the installation area is small, which not only reduces the pump room area, improves the area and space, but also saves the capital investment greatly. If IP54 outdoor motor is used, the investment of pump house infrastructure can be saved. 三、安装方便：泵进出口法兰与标准阀门法兰相同，且位于同一中心线上，中心低，便于管道布置，泵房设计也更为合理实用。 3、 Easy installation: the pump inlet and outlet flange is the same as the standard valve flange, and is located on the same central line, with low center, which is convenient for pipeline layout, and the pump house design is more reasonable and practical. 四、绝对的便拆功能、检修方便、维护费少： 4、 It is easy to dismantle, convenient for maintenance and low maintenance cost 1、AYSLB型泵采用密封便拆式结构，该泵在检修机械密封件时，不需拆卸电机与进出口管路，只需拆开并取下对夹式连轴器，然后再拆开并取出泵盖上的密封件压盖，即可取出机械密封进行更换，检修十分方便省力。 1. AYSLB pump adopts the structure of seal and disassembly. When repairing the mechanical seal of the pump, it is not necessary to dismantle the motor and the inlet and outlet pipelines, but only to disassemble and remove the clamp coupling, and then remove and take out the seal gland on the pump cover to take out the mechanical seal for replacement. The inspection and repair is very convenient and labor-saving. 五、平稳、使用寿命长：SLB型泵采用特制的对夹式连轴器，具有运行平稳，噪音低，组件同心度高，增加了运行的平稳性，使用寿命长。 5、 Stable and long service life: SLB pump adopts special clamp type coupling, which has smooth operation, low noise and high concentricity of components, which increases the stability of operation and long service life. 六、使用效率高、性能好：叶轮采用新型双吸式结构水力模型设计制造，消除了原立式泵径向拉力大的不足之处，运行中叶轮始终处于悬浮状态，具有效率高，性能好等特点。同时也降低了石墨轴承的平面磨损，从而提高了水泵的使用寿命，降低了运行成本。 6、 High efficiency and good performance: the impeller is designed and manufactured by a new double suction structure hydraulic model, which eliminates the shortcomings of the original vertical pump with large radial tension. The impeller is always in suspension state during operation, with high efficiency and good performance. At the same time, it also reduces the plane wear of graphite bearing, so as to improve the service life of water pump and reduce the operation cost. 七、设计新颖、结构独特、节约了运行管理费：采用全新内下置水润滑轴承，利用水泵出水口的高压回液，经回水管进入泵底座里的内自行润滑，不需润滑油，故不污染输送介质，并免去了定期注油的麻烦。采用进口石墨浸渍树脂轴承配镍基合金轴套与推力盘，具有耐磨性能高、摩擦系数低、不老化、抗泥沙等特点，另外轴承上还配有推力盘，能承受泵叶轮的自重推力。 7、 New design, unique structure, saving operation and management costs: the use of new water lubrication bearings, the use of high-pressure return water pump outlet, through the return pipe into the pump base inside the self lubrication, no need for lubricating oil, so no pollution of the transmission medium, and avoid the trouble of regular oil injection. The imported graphite impregnated resin bearing with nickel base alloy sleeve and thrust disc has the characteristics of high wear resistance, low friction coefficient, no aging and anti sediment. In addition, the bearing is also equipped with a thrust disc, which can bear the self weight thrust of the pump impeller. 八、密封可靠、无泄漏：轴封采用优质机械，密封摩擦副采用石墨对碳化硅或碳化硅对硬质合金，耐磨损、无泄漏、使用寿命长。 8、 Reliable sealing and no leakage: the shaft seal adopts high-quality machinery, and the sealing friction pair adopts graphite to silicon carbide or silicon carbide to cemented carbide, with wear resistance, no leakage and long service life. 九、零部件标准化、系列化、通用程度高：如电机采用Y或Y2系列B5型，属于标准通用电机，维护、保养、方便、快捷。 9、 High degree of standardization, serialization and generality of parts and components: if the motor adopts y or Y2 series B5, it belongs to the standard general-purpose motor, maintenance, convenient and fast. 十、该系列便拆立式单级双吸泵，属于本公司开发的新一代便拆立式泵，与其它厂家的便拆式泵相比有个无可比拟的特点：SLB型泵的总高度在不影响密封件便拆功能的前提下，得到极大的降低，因为只便拆机械密封件，所以泵与电机联接支架特别短，稳定性更强，而且密封便拆型泵在更换机械密封时，不管多大功率的水泵，即使现场只有一名维修工，只要他能拿得动半片连轴器，便能独立完密封件的检修工作，实现绝对便拆便维的功效。 10、 This series of removable vertical single-stage double suction pumps belong to the new generation of removable vertical pumps developed by our company. Compared with the removable pumps of other manufacturers, the total height of SLB pump is greatly reduced without affecting the function of easy removal of seals. Because only mechanical seals are removed, the connection support between pump and motor is particularly short and the stability is stronger, Moreover, when replacing the mechanical seal, no matter how high the power of the pump, even if there is only one maintenance worker on site, as long as he can hold the half piece coupling, he can independently complete the maintenance work of the seal, so as to achieve the effect of absolute disassembly and maintenance. |
| 上一页 立式双吸泵结构特点 |
| 下一页 什么是双吸泵 |
Copyright © 技术支持：遨游网络